Vehicle Applications

This interface is ONLY compatible with the following models where the factory OPS (Optical Parking System) is present.

Models without OPS are not compatible as they don’t have the ability to be programmed for the reverse camera function.

Features

-      Rear-view camera input

-      Automatic switching to rear-view camera input (additional head unit coding required)

-      Plug & Play Harness with CAN-Bus interface

-      Interface provides camera power supply

Limitations

To display the camera image on the factory monitor the vehicle needs to be coded for reverse camera using VCDS  / VAG COM or equivalent

Only compatible with NTSC format cameras

Vehicle must have factory OPS

* NOT compatible to Composition Media with the following part numbers, as a full coding of the head-unit is not possible on these units:

3Q0035812

3Q0035819, 3Q0035819A, 3Q0035819B, 3Q0035819C

3Q0035820, 3Q0035820A, 3Q0035820B, 3Q0035820C

5G0035812

5G0035819, 5G0035819A, 5G0035819B, 5G0035819C

5G0035820, 5G0035820A, 5G0035820B, 5G0035820C

Only the last 6 digits/numbers are relevant.

The letter at the end is merely the software version of the head-unit,

newer versions are likely to not be compatible as well!

The part number of the head-unit can be displayed on the monitor:

Menu button->Setup->System-Information->part number device

RL3-MIB-EP-LG (LG Manufactured Head Unit)

RL3-MIB-EP (Continental Manufactured Head Unit)

Vehicle Applications

Features

-      Rear-view camera input

-      Automatic switching to rear-view camera input

-      2 x Additional Video Input for aftermarket devices

-      No Coding Required

Notice

Ribbon connection type interface requiring head unit to be opened for installation

Vehicle Applications

Features

-      Rear-view camera input

-      Automatic switching to rear-view camera input

-      1 x Additional Video Input for aftermarket devices

-      No Coding Required

Notice

Ribbon connection type interface requiring head unit to be opened for installation

Vehicle Applications

Features

-      Rear-view camera input

-      Automatic switching to rear-view camera input

-      Active Guidelines for rear-view camera

-      Front camera input

-      Automatic front camera switching after reverse gear for 10 seconds

-      2 x Additional Video Input for aftermarket devices

-      No Coding Required

Limitations

Active Guidelines are not available for all vehicles (CAN-Bus dependent)

Only compatible with NTSC format cameras

Factory PDC graphics won’t display with interface connected. Acoustic signals will still be present.

Vehicle Applications

Features

-      Plug & Play

-      Rear-view camera input

-      Automatic switching to rear-view camera input

-      Active Guidelines for rear-view camera

-      Front camera input

-      1 x Additional Video Input for aftermarket devices

-      No Coding Required

Limitations

Active Guidelines are not available for all vehicles (CAN-Bus dependent)

Vehicle Applications

Features

-      Rear-view camera input

-      Automatic switching to rear-view camera input

-      1 x Additional Video Input for aftermarket devices

-      No Coding Required

Notice

Ribbon connection type interface requiring head unit to be opened for installation

Vehicle Applications

Features

- Dedicated Reverse Camera Input

- Dedicated Front Camera Input

- Automatic switching to reverse camera

- No Coding Required

- 1 x Additional Video Inputs for aftermarket devices

Limitations

- Only compatible with NTSC format cameras

- Factory PDC graphics won’t display with interface connected.  Acoustic signals will still be present.

Vehicle Applications

Features

- Dedicated Auto switching Reverse Camera Input

- Dedicated Front Camera Input

- Automatic switching to front camera input after disengaging the reverse gear for 10 seconds

- No Coding Required

- 2 x Additional Video Inputs for aftermarket devices

Limitations

- Only compatible with NTSC format cameras

- Factory PDC graphics won’t display with interface connected.  Acoustic signals will still be present.

Vehicle Applications

- Following Porsche models with the PCM 3.0 or PCM 3.1 navigation system:

Features

- Perfect Integration to Original Equipment

- Dedicated Auto switching Reverse Camera Input

- Dedicated Front Camera Input

- Automatic switching to front camera input after disengaging the reverse gear up to 20km/h

- Reverse Camera Power Supply (+12V Max. 1A)

- Front Camera Power Supply (+12V Max. 1A)

- Simple activation via interface (No additional coding required)

- Optional facility of coding of ParkAssistant to retrofit factory PDC

- Plug & Play Installation

Limitations

911, Boxster and Cayman PCM3.1 software must be minimum 4.xx

Vehicle Applications

Features

-      Perfect Integration to Original Equipment

-      Plug & Play Installation

-      Rear-view camera input

-      Automatic switching to rear-view camera input on engagement of reverse gear from all operation modes

-      Front camera input

-      Side camera inputs

-      Side- or front camera activation via indicator signal

-      Manual switching to cameras

-      Picture-in-picture mode combining after-market rear-view and front camera picture(s) with factory parking sensor graphics

-      Interactive lane lines with calibration function

-      Simultaneous use of picture-in-picture factory parking sensor graphics and interactive lane lines

-      Own on-screen display and setup

-      Controls of AV sources (e.g. DVB-T Tuner etc.) by MIB system

-      2 trigger outputs (+12V max. 1A), separately adjustable switching events (CAN, ACC, camera, reverse gear)

-      Compatible with all factory video accessories

-      USB update-port for software-updates by consumer